Page 1 of 1

#1 Building Valve Amplifiers, 1st ed.

Posted: Thu May 20, 2021 12:29 pm
by jack
Selling this in good but used condition. There is a crease on the back cover but the spine is not broken etc.

Five quid +p&p

PXL_20210520_112824151_copy_756x1008.jpg
PXL_20210520_112824151_copy_756x1008.jpg (219.93 KiB) Viewed 3814 times

#2 Re: Building Valve Amplifiers, 1st ed.

Posted: Thu May 20, 2021 12:37 pm
by Paul Barker
Yes please

#3 Re: Building Valve Amplifiers, 1st ed.

Posted: Thu May 20, 2021 12:43 pm
by jack
Ta Paul. Could you pm me your address please?

Sold in 8 minutes!!!

#4 Re: Building Valve Amplifiers, 1st ed.

Posted: Thu May 20, 2021 1:19 pm
by ed
in case anybody else is interested I also have a pristine copy £5 + p&p
jones.jpg
jones.jpg (144.18 KiB) Viewed 3793 times

#5 Re: Building Valve Amplifiers, 1st ed.

Posted: Thu May 20, 2021 9:57 pm
by Ray P
ed wrote: Thu May 20, 2021 1:19 pm in case anybody else is interested I also have a pristine copy £5 + p&p
Yes please Ed.

Where do I send the fiver and penny blacks?

#6 Re: Building Valve Amplifiers, 1st ed.

Posted: Sat May 22, 2021 12:52 pm
by Paul Barker
Nick, book arrived today thank you?

#7 Re: Building Valve Amplifiers, 1st ed.

Posted: Sat May 22, 2021 1:05 pm
by jack
Paul Barker wrote: Sat May 22, 2021 12:52 pm Nick, book arrived today thank you?
"?" - all ok?

#8 Re: Building Valve Amplifiers, 1st ed.

Posted: Sun May 23, 2021 6:53 am
by Paul Barker
Yes thank you. When I was at Vry’s flat with 212 amp he told us was writing this book, and that he would use me as an example. But he probably didn’t as no one has mentioned it. But as I think I might be a hoarder I’m satisfied to have it.

#9 Re: Building Valve Amplifiers, 1st ed.

Posted: Sun May 23, 2021 10:04 am
by jack
Paul Barker wrote: Sun May 23, 2021 6:53 am Yes thank you. When I was at Vry’s flat with 212 amp he told us was writing this book, and that he would use me as an example. But he probably didn’t as no one has mentioned it. But as I think I might be a hoarder I’m satisfied to have it.
This is the 1st ed. - there is a 2nd which is heavily revised. I can check?

#10 Re: Building Valve Amplifiers, 1st ed.

Posted: Mon May 24, 2021 12:27 pm
by Ray P
ed wrote: Thu May 20, 2021 1:19 pm in case anybody else is interested I also have a pristine copy £5 + p&p
Received in this morning's post Ed, thank you.

Ray