Anybody have any ideas as to where I might be able to get hold of a small (around 20mA) 230/150V transformer. If it also has a 6.3V heater winding, that would be even better.
Tried RS/CPC etc. without much success.
150V Transformer
-
themystical
- User
- Posts: 65
- Joined: Sun Aug 31, 2008 1:02 pm
#3
That would work thank you Simon....it is quite a complicated transformer though.
-
simon
- Thermionic Monk Status
- Posts: 5652
- Joined: Thu May 24, 2007 11:22 am
- Location: People's Republic of South Yorkshire
#4
True there are a lot of wires - Hammond make their transformers with primaries to suit all territories, it's just a matter of using the correct wires and terminating the others.
On the secondary side, the HT winding is centre tapped and is intended to be used with a vacuum rectifier. The LT secondary centre tap allows the heaters to be raised easily.
On the secondary side, the HT winding is centre tapped and is intended to be used with a vacuum rectifier. The LT secondary centre tap allows the heaters to be raised easily.