Page 1 of 1
#1 Enclosures from Rapid
Posted: Thu Jun 09, 2011 3:04 pm
by brig001
These look nice for a valve amp or whatever, especially if, like me, your wood and metal working skills aren't up to much.
http://www.rapidonline.com/Tools-Fasten ... kw/hammond
https://www.rapidonline.com/1/1/42913-h ... anels.html
#2
Posted: Thu Jun 09, 2011 3:41 pm
by Nick
Yep, the lower link is what I built Davids 2a3 amp in, though they were from Bluebell
#3
Posted: Thu Jun 09, 2011 4:07 pm
by david C
piccy of my 2A3 amp built by Nick using the Hammond chassis
very pleased with it, real quality,
#4
Posted: Thu Jun 09, 2011 4:21 pm
by Nick
I will steal that picture if I may?
#5
Posted: Thu Jun 09, 2011 4:23 pm
by david C
of course you can Nick
#6
Posted: Thu Jun 09, 2011 6:10 pm
by brig001
Very nice. Didn't know if anyone had seen them or not... Might look into one for either my next project or even finishing off my current one nicely. Will check with the jury at Owston to see if it is worth it or not.