Signal Generators
- izzy wizzy
- Old Hand
- Posts: 1496
- Joined: Fri Nov 02, 2007 7:02 pm
- Location: Auckland NZ
- Contact:
#1 Signal Generators
This might have been covered before so maybe all I need is a pointer.
What's the deal with the low cost DDS singal generator arbitary waveform generator or whatever they're called gizmos that litter ebay. They seem cheap for what they do assuming I know what they do, Compared to basic old school function generators made by Thurlby Thandar, Jupiter, GWinstek etc which I think are now called analog function generators.
I'm asking as I need one and wondering have the DDS things popped up in place of the analog ones while I haven't been looking? And if so, are they worth it at £50 or so? I'm not measuring distortion but want something to stick into my amplifiers to see if they're going properly. I don't need a new thing and don't really want to spend more then £100 unless I have to.
Thanks for any help.
Cheers,
Stephen
What's the deal with the low cost DDS singal generator arbitary waveform generator or whatever they're called gizmos that litter ebay. They seem cheap for what they do assuming I know what they do, Compared to basic old school function generators made by Thurlby Thandar, Jupiter, GWinstek etc which I think are now called analog function generators.
I'm asking as I need one and wondering have the DDS things popped up in place of the analog ones while I haven't been looking? And if so, are they worth it at £50 or so? I'm not measuring distortion but want something to stick into my amplifiers to see if they're going properly. I don't need a new thing and don't really want to spend more then £100 unless I have to.
Thanks for any help.
Cheers,
Stephen
#2 Re: Signal Generators
I made one back in the day when my farnell lfm4 packed in. There is some background here:
http://www.vitalstates.org/diy/amplifie ... siggen.htm
The simple way I looked at it was based entirely on what I wanted it for. I wanted to do distortion measurement and at the time(2010 ish) the affordable dds chips weren't up to it so I ended up with a wien bridge.
About 3 years ago I had another look and the dds chips had improved quite a bit. I was half way through an updated diy version when I got sidetracked....it hasn't resurfaced yet.
The dds versions on ebay all seem to have high distortion but I'm sure that's ok for just checking the waveform and detecting clipping etc. The bottom line is you get what you pay for and if you want low distortion in dds then you gots to pay.
http://www.vitalstates.org/diy/amplifie ... siggen.htm
The simple way I looked at it was based entirely on what I wanted it for. I wanted to do distortion measurement and at the time(2010 ish) the affordable dds chips weren't up to it so I ended up with a wien bridge.
About 3 years ago I had another look and the dds chips had improved quite a bit. I was half way through an updated diy version when I got sidetracked....it hasn't resurfaced yet.
The dds versions on ebay all seem to have high distortion but I'm sure that's ok for just checking the waveform and detecting clipping etc. The bottom line is you get what you pay for and if you want low distortion in dds then you gots to pay.
There's nowhere you can be that isn't where you're meant to be
#3 Re: Signal Generators
I use a sdg1020 that I got several years ago now, it was a bit more than those ebay DDS jobs, but basically the same thing, I suspect its 12bit DDS so only 0.02% or so distortion with the sine, but for day to day use its great. If you want lowish distortion then PC and sound card or a CD player are probably the cheap way of getting that. I do have a analogue 1kHz source that has 0.00001 THD, but that’s for high days and holidays.
Bottom line DDS can be great, but don't know just what the £60 ones on ebay are like.
Bottom line DDS can be great, but don't know just what the £60 ones on ebay are like.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- shane
- Social outcast
- Posts: 3405
- Joined: Sun Sep 16, 2007 12:09 pm
- Location: Kept in a cool dry place.
#4 Re: Signal Generators
If all you want is something to shove in the input of an amp to see if anything comes out of the output, there are a number of signal generator apps you can download to a smart phone for free. Probably horrendous distortion though.
The world looks so different after learning science. For example, trees are made of air, primarily. When they are burned, they go back to air, and in their flaming heat is released the flaming heat of the Sun which was bound in to convert air into tree.
- izzy wizzy
- Old Hand
- Posts: 1496
- Joined: Fri Nov 02, 2007 7:02 pm
- Location: Auckland NZ
- Contact:
#5 Re: Signal Generators
You got a lot of interesting stuff on those web pages. Now you got me looking at micro controllers and LCD displaysed wrote: ↑Wed Jan 29, 2020 7:21 pm I made one back in the day when my farnell lfm4 packed in. There is some background here:
http://www.vitalstates.org/diy/amplifie ... siggen.htm
The simple way I looked at it was based entirely on what I wanted it for. I wanted to do distortion measurement and at the time(2010 ish) the affordable dds chips weren't up to it so I ended up with a wien bridge.
About 3 years ago I had another look and the dds chips had improved quite a bit. I was half way through an updated diy version when I got sidetracked....it hasn't resurfaced yet.
The dds versions on ebay all seem to have high distortion but I'm sure that's ok for just checking the waveform and detecting clipping etc. The bottom line is you get what you pay for and if you want low distortion in dds then you gots to pay.
- izzy wizzy
- Old Hand
- Posts: 1496
- Joined: Fri Nov 02, 2007 7:02 pm
- Location: Auckland NZ
- Contact:
#6 Re: Signal Generators
Thanks for the replies as they help focus on what I want. Don't think I'm fussed on low distortion but I have a phone app generator and that doesn't do what I want - not enough drive and fiddly to use.
The thing that concerns me about the cheaper DDS gizmos is the lack of knobs and never seen one going/being used. I like to wiggle the frequency around and wind the level up and down to see how things react. If that's done by inputing a setting rather than turning a knob, then that device isn't for me. When there's panic under fire, I want to grab something and wind it down. I hate menus, layers of menus to reach a setting. Is that how the cheaper DDS gizmos work? I've done quite a bit of reading but I guess I'm after feedback from folk that have used both.
So would those prejudices describe the device I'm after as an analog generator? Or have I misread how the DDS machines work?
Maybe I'm too much of an analog person. He says going back to look at microcontrollers, LCD displays ....
The thing that concerns me about the cheaper DDS gizmos is the lack of knobs and never seen one going/being used. I like to wiggle the frequency around and wind the level up and down to see how things react. If that's done by inputing a setting rather than turning a knob, then that device isn't for me. When there's panic under fire, I want to grab something and wind it down. I hate menus, layers of menus to reach a setting. Is that how the cheaper DDS gizmos work? I've done quite a bit of reading but I guess I'm after feedback from folk that have used both.
So would those prejudices describe the device I'm after as an analog generator? Or have I misread how the DDS machines work?
Maybe I'm too much of an analog person. He says going back to look at microcontrollers, LCD displays ....
#7 Re: Signal Generators
The one I have has a knob that will adjust the parameter you last picked, or you can type in the value you want. Each output also has a on off button. But again, I don;t know about the £60 version. I agree with all your requirements.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
#8 Re: Signal Generators
there seem to be a few on ebay at the moment. This one caught my eye:
https://tinyurl.com/v5xn9km
it appears to have the same functionality as my old farnell lfm4 but without the output level monitor. It has the same buttons as the lfm4 and it has knobs to twiddle, and more to the point, has the same distortion levels as the lfm4. I'm suspecting this may be analog rather than dds.
https://tinyurl.com/v5xn9km
it appears to have the same functionality as my old farnell lfm4 but without the output level monitor. It has the same buttons as the lfm4 and it has knobs to twiddle, and more to the point, has the same distortion levels as the lfm4. I'm suspecting this may be analog rather than dds.
There's nowhere you can be that isn't where you're meant to be
- izzy wizzy
- Old Hand
- Posts: 1496
- Joined: Fri Nov 02, 2007 7:02 pm
- Location: Auckland NZ
- Contact:
#9 Re: Signal Generators
That one caught my eye Ed after you mentioned the Farnell one you had.
This DDS one https://tinyurl.com/rgfyapg looks OK too.
The cheap DDS ones seem very small and reckon I'd need a magnifying glass to read the display.
Thanks guys. All very helpful.
This DDS one https://tinyurl.com/rgfyapg looks OK too.
The cheap DDS ones seem very small and reckon I'd need a magnifying glass to read the display.
Thanks guys. All very helpful.
#10 Re: Signal Generators
Yep, looks very analog
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
#11 Re: Signal Generators
This one looks like its got a rotary encoder, so should give the required functionality.
https://www.ebay.co.uk/p/5027043225?iid ... 5603&rt=nc
Here is the manual (I think).
http://gotronik.pl/img/FY6600_Series_Users_Manual.pdf
Sine distortion is not great.
https://www.ebay.co.uk/p/5027043225?iid ... 5603&rt=nc
Here is the manual (I think).
http://gotronik.pl/img/FY6600_Series_Users_Manual.pdf
Sine distortion is not great.
Whenever an honest man discovers that he's mistaken, he will either cease to be mistaken or he will cease to be honest.
- izzy wizzy
- Old Hand
- Posts: 1496
- Joined: Fri Nov 02, 2007 7:02 pm
- Location: Auckland NZ
- Contact:
#12 Re: Signal Generators
I thought one of those would do it until I saw the size of it. And the screen size is 50mm and with all that info on it, I can't imagine me seeing much of it. And it was at that point this thread started.
-
- Thermionic Monk Status
- Posts: 5651
- Joined: Thu May 24, 2007 11:22 am
- Location: People's Republic of South Yorkshire
#13 Re: Signal Generators
This won't help Stephen but what I've done in the past is create some test tones and sweeps in Audacity, saved them into my Squeeze Center library and then I can just play them, in a loop if necessary.
It's been very educational, along with a spectrum analyser ap on my tablet/phone, though I don't know how accurate they are for proper measurement. But they are my favourite price - free!
It's been very educational, along with a spectrum analyser ap on my tablet/phone, though I don't know how accurate they are for proper measurement. But they are my favourite price - free!
- izzy wizzy
- Old Hand
- Posts: 1496
- Joined: Fri Nov 02, 2007 7:02 pm
- Location: Auckland NZ
- Contact:
#14 Re: Signal Generators
That might be very helpful at that price. None of the other stuff is going anywhere and I got all the rest Can speriment to see if it's for me.simon wrote: ↑Thu Jan 30, 2020 12:38 pm This won't help Stephen but what I've done in the past is create some test tones and sweeps in Audacity, saved them into my Squeeze Center library and then I can just play them, in a loop if necessary.
It's been very educational, along with a spectrum analyser ap on my tablet/phone, though I don't know how accurate they are for proper measurement. But they are my favourite price - free!
- izzy wizzy
- Old Hand
- Posts: 1496
- Joined: Fri Nov 02, 2007 7:02 pm
- Location: Auckland NZ
- Contact:
#15 Re: Signal Generators
Time flies by and I didn't get the sig gen I wanted and now it's discontinued. That in itself has probably worked out quite well.simon wrote: ↑Thu Jan 30, 2020 12:38 pm This won't help Stephen but what I've done in the past is create some test tones and sweeps in Audacity, saved them into my Squeeze Center library and then I can just play them, in a loop if necessary.
It's been very educational, along with a spectrum analyser ap on my tablet/phone, though I don't know how accurate they are for proper measurement. But they are my favourite price - free!
So thought I'd try this idea and after a play today with Audacity, reckon it has more merit than I thought. And with RPis here there and everywhere, this looks like the answer. Great price too . Thanks Simon.