For high-power enthusiasts

If they glow, this is the place to be
Post Reply
User avatar
IslandPink
No idea why I do this anymore
Posts: 6834
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

For high-power enthusiasts

Post by IslandPink » Mon Feb 18, 2019 6:14 pm

Something that popped up in discussions on the Joelist today -
http://www.hfti.fr/userfile/by1144l1.pdf
Some nice spec values there. Needs a special boiler for steam-cooling of the anode, apparently.
"The bass is the king of the instruments - it has no known natural predator" (Wobble)

User avatar
pre65
Amstrad Tower of Power
Posts: 17575
Joined: Wed Aug 22, 2007 11:13 pm
Location: North Essex

Re: For high-power enthusiasts

Post by pre65 » Mon Feb 18, 2019 6:37 pm

E2V were EEV = English Electric Valves.

Not far from me in Chelmsford.

Filament current 263 - 311A @ 9.6v

And weighs 57KG.


WOW.
Last edited by pre65 on Mon Feb 18, 2019 6:44 pm, edited 1 time in total.
Life is what happens to you while you're busy making other plans. John Lennon

G-Popz THE easy listening connoisseur. (Philip)

RhythMick
Old Hand
Posts: 500
Joined: Fri Jun 23, 2017 12:24 pm

Re: For high-power enthusiasts

Post by RhythMick » Mon Feb 18, 2019 6:41 pm

Scary. You'd have to be mad, mad I tell you mad, mad. Nobody around here would... Nurse, nurse, time for my meds...

User avatar
IslandPink
No idea why I do this anymore
Posts: 6834
Joined: Tue May 29, 2007 7:01 pm
Location: Denbigh, N.Wales

Re: For high-power enthusiasts

Post by IslandPink » Mon Feb 18, 2019 8:08 pm

There are all sorts of fun values on there - bias : -765V , grid current : 3.1amps
"The bass is the king of the instruments - it has no known natural predator" (Wobble)

User avatar
Mike H
Amstrad Tower of Power
Posts: 18242
Joined: Sat Oct 04, 2008 5:38 pm
Location: The Fens
Contact:

Re: For high-power enthusiasts

Post by Mike H » Tue Feb 19, 2019 7:03 pm

Note the warnings about radiation hazard. :D
 
I never make the same mistake twice. Instead I prefer to fill my day with a variety of different mistakes

User avatar
jack
Social outcast
Posts: 3123
Joined: Wed Dec 29, 2010 8:58 pm
Location: No longer living somewhere stupidly hot...
Contact:

Re: For high-power enthusiasts

Post by jack » Tue Feb 19, 2019 9:07 pm

When I were a lad, we went on a trip into the crystal palace BBC transmitter rooms, deep beneath the mast...

They had water-cooled valves like these for TV. Beasts. Cabinets were glass-fronted and you could see them boiling away merrily...

chris661
Shed dweller
Posts: 2251
Joined: Mon Feb 22, 2010 7:29 am
Location: Sheffield

Re: For high-power enthusiasts

Post by chris661 » Wed Feb 20, 2019 7:17 pm

Serious power there. I think you'd struggle to run it on a domestic (~100A) supply. A 63A 3-phase would have a fighting chance.

Is it bad that I want to grab a few of these for PA use?

Chris

Post Reply