clearout

Dedicated to those large boxes at one end of the room
Post Reply
User avatar
ed
retired
Posts: 5384
Joined: Thu Jun 21, 2007 4:01 pm
Location: yorkshire
Contact:

#1 clearout

Post by ed »

I'm being ruthless with the clearout bug which has come upon me.

I'm wondering if any of these might be of interest to somebody. Love'em or hate'em I never had a word of criticism from anybody, certainly not customers, but youse lot are just too polite....



https://www.vitalstates.org/diy/plans/almo1.pdf
https://www.vitalstates.org/diy/plans/almo2.pdf
https://www.vitalstates.org/diy/plans/Alpair%2010-1.pdf
https://www.vitalstates.org/diy/plans/Alpair%2010-2.pdf
https://www.vitalstates.org/diy/plans/pipi-design.pdf
https://www.vitalstates.org/diy/plans/vofo-design2.pdf
There's nowhere you can be that isn't where you're meant to be
User avatar
Dave the bass
Amstrad Tower of Power
Posts: 12273
Joined: Tue May 22, 2007 4:36 pm
Location: NW Kent, Darn Sarf innit.

#2 Re: clearout

Post by Dave the bass »

Ta Ed, much 'preciated. I fancy doing a Pipi one day.
"The fat bourgeois and his doppelganger"
User avatar
ed
retired
Posts: 5384
Joined: Thu Jun 21, 2007 4:01 pm
Location: yorkshire
Contact:

#3 Re: clearout

Post by ed »

I beleive I have the templates for the horn shape somewhere. They will save an awful lot of time when cutting the leaves for the ply press that makes the horn. They are also used to cut the rebates into the cabinet sides.

I will look them out if you like.
There's nowhere you can be that isn't where you're meant to be
User avatar
ed
retired
Posts: 5384
Joined: Thu Jun 21, 2007 4:01 pm
Location: yorkshire
Contact:

#4 Re: clearout

Post by ed »

I've just had a pm from a member asking how much....

perhaps I should have added: these are free, just down load them.
There's nowhere you can be that isn't where you're meant to be
Post Reply