For the three and more legged things
Ali Tait
Eternally single
Posts: 4389 Joined: Fri Jun 08, 2007 8:10 pm
Location: Galashiels
Post
by Ali Tait » Mon Apr 05, 2010 7:09 pm
Just bought a Tripath amp off the bay.It's rather good,and indeed sounds quite like a valve amp.There is one problem-the PS caps are rated at 35v and are run at this voltage,so not good for reliability.Can anyone suggest where I can get 10000 uF say min of 50v that are no more than 30mm high please?
Ta!
ed
retired
Posts: 5384 Joined: Thu Jun 21, 2007 4:01 pm
Location: yorkshire
Contact:
Post
by ed » Mon Apr 05, 2010 8:49 pm
There's nowhere you can be that isn't where you're meant to be
Ali Tait
Eternally single
Posts: 4389 Joined: Fri Jun 08, 2007 8:10 pm
Location: Galashiels
Post
by Ali Tait » Mon Apr 05, 2010 9:21 pm
Cheers Ed,but they are too high at 40mm.
al newall
Needs to get out more
Posts: 1737 Joined: Mon Aug 06, 2007 7:55 pm
Location: Chester
Post
by al newall » Mon Apr 05, 2010 9:24 pm
They have probably been selected for their height, rather than working voltage. In which case you may struggle to find anything.
Build a new box for it.
Much to learn there is.
Ali Tait
Eternally single
Posts: 4389 Joined: Fri Jun 08, 2007 8:10 pm
Location: Galashiels
Post
by Ali Tait » Mon Apr 05, 2010 9:44 pm
Aye,I had the same thought.They are decent ones though-Elnas,assuming they are not rip-offs.