These are NOS Carver Amazing ribbons (200-12K), Infinity SEMIT super tweeters (>12K), a Mivoc 12" woofer in a 40 litre box with a large cap to smooth the lower knee and add another half octave (26-200Hz), a MiniDSP ICE plate amp and a MiniDSP crossover. The drivers are all acoustically time aligned (no DSP delay). The Carver analogue Xover has been modelled in the MiniDSP and the Sound is very good! 173cm x 40cm x 45cm. The front panel is 1.5" baltic birch.
These are going to my recording engineer son.
ROWUKs newest build
#1 ROWUKs newest build
Last edited by rowuk on Tue Jan 03, 2017 7:37 pm, edited 2 times in total.
Whenever I feel blue, I start breathing again.
- IslandPink
- Amstrad Tower of Power
- Posts: 10041
- Joined: Tue May 29, 2007 7:01 pm
- Location: Denbigh, N.Wales
#4 Re: ROWUKs newest build
Hadn't heard of Mivoc till now ! - which driver is it ?
Nice work btw.
Nice work btw.
"Once you find out ... the Circumstances ; then you can go out"
#5 Re: ROWUKs newest build
AW3000. It is actually a very good subwoofer driver of reasonable efficiency (88dB W/Meter)with clean response to 500 Hz. Quiet paper cone. Perfect in this UseCase.
Whenever I feel blue, I start breathing again.