audio-talk

From what I can ascertain both Apple & Microsoft are as bad as each other when it comes to digital rights management and to single out respective company heads and bash them is to my mind puerile. They both be bad/good depending from which angle you aproach. Yes, but Apple are much better at a ...

You don;t mean the ceramic unit that was fitted to PA cabs do you?

Ah but you know about computers Nick, so people in your field of work have an excuse. Ok, but it also sort of makes our opinion valid as well. Just because it all seems fine now, doesn't mean that in five years time you will look up from your iDesk, and find that the embedded iMind you have had fit...

But

Just because I have problem with apple doesn't make me a fan of monkey boy Balmer Smile

Goes for the OS as well.

If I can't read and change it, I don't trust it.

I would try adding a 0.47uf before the choke and see what it does, if not enough try a 1u. Dont worry about the 120k to 135k If the anode voltage is right, then I would leave it there. If you prefer a 120k, then tweek the cathode resistor a little, but in terms of op points, don't worry, this is not...

Is this heresy? Wink

Hardly, but certainly it has no logic to it.

It wouldnt be my choice, looks like loads and loads of 2nd harmonic. Maybe you will get away with it in push pull. not that linear a valve from those lines.

Please dont mention 833's. That and 75tl and friends are there in the wings calling to me. Must resist...

Entertaining, nice, must find more. Gong meet Yes, while talking to Spyro Gyra about Soft Machine

They are 300R primaries from AE @ 300ma (I think). You can borrow them if you want, those amps are mostly dismantled now.

If used with choke input it would be extra neat as if the load drops so it goes out of choke input, this can kick in and keep the voltage down, probably wont pass that much current and should reach a equilibrium between the choke current and output voltage.

Cool

Nice idea.

Just one side.

Looking at the logs, the script used the member list page to get all the id's then tried to post a message to each of the id's. I have added a check on the member list page where you need to be a user with 5 posts again to get to see it. Can't see any downside to that. I now have a batch job that wi...